REDUCERS
BACK END REDUCERS
PART #
LENGTH IN
LENGTH MM
SYSTEM SIZE
INLET END
Single-Wall. Heat Treatment: Induction Hardened. Hardness: Up to 50HRc. 85 bar (1233 psi) Max Working Pressure. Steel with CCI inserts. Outlet End: 148mm.
115-10858H 47.25 1200 DN150/6 to DN125/4.8
Putz 6" SK
115-11475H 63 1600 DN150/5.75 to DN125/4.8 Euro Female 115-13684H 59.06 1500 DN150/5.75 to DN125/4.8 Euro Female 115-11673H 47.25 1200 DN150/5.75 to DN125/4.8 Putz ZX 115-09959H 52.37 1330 DN150/5.75 to DN125/4.8 Euro Female 115-13369H 65 1651 DN150/5.75 to DN125/4.8 Euro Female
Other lengths available, contact us.
CCI-lined (chrome carbide) reducer and weld ends for exceptional performance. Hardness: 600 to 650 Brinell. Max Working Pressure: 85 bar (1233 psi). DECK & BOOM REDUCERS
PART # LENGTH IN
LENGTH MM
SYSTEM SIZE
120-13169 118.12 3000 ID: DN125/4.8 Metric CCI - DN112/4.4 Metric CCI 120-11971 39.37 1000 ID: DN125/4.8 Metric CCI - DN112/4.4 Metric CCI
4.4
120-19868 41.34
1050 ID: DN125/4.8 Metric CCI - DN117/4.6 Metric CCI
120-16515 118.11
3000 ID: DN125/4.8 Metric CCI - DN117/4.6 Metric CCI
4.6
120-17321 39.37
1000 ID: DN125/4.8 Metric CCI - DN117/4.6 Metric CCI
120-16611 47.25
1200 ID: DN150/5.75 ZX Male CCI - DN117/4.6 Metric
120-09959 52.38
1331 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric
120-11673 47.25
1200 ID: DN150/5.75 ZX Male CCI - DN125/4.8 Metric
120-14218 50.75
1289 ID: DN150/5.75 Euro Female CCI -DN125/4.8 Metric
120-11475 63
1600 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric
120-13369 65
1650 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric
120-18188 55.5
1410 ID: DN150/5.75 ZX Male CCI - DN125/4.8 Metric
4.8
120-22561 51.57
1310 ID: DN150/5.75 ZX Male CCI - DN125/4.8 Metric
120-13370 61 1550 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric 120-09113 118.13 3000 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric 120-13684 59.06 1500 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric 120-17369 39.37 1000 ID: DN150/5.75 ZX Male CCI - DN125/4.8 Metric 120-12144 57.5 1461 ID: DN150/5.75 Euro Female CCI - DN125/4.8 Metric 120-23237 70.87 1800 ID: DN150/5.75 ZX Male CCI - DN125/4.8 Metric
Other lengths available, contact us.
IMPROVE YOUR BOOM PIPE LONGEVITY! Con Forms reducers with CCI inner sleeves, and bends with reinforced outlet extensions, optimize high-wear zones and will last much longer than low-cost, unhardened steel pipes and components.
CONFORMS.COM | 19
Powered by FlippingBook