VALVES: HYDRAULIC
HYDRAULIC TWIN CYLINDER SHUT-OFF VALVE
The Hydraulic Shut-Off valve with twin cylinders features a push-pull operation by two 2.5” bore hydraulic cylinders. The valve body is rated at a nominal concrete working pressure of 1500psi (103 bar). The sliding shut-off plate has two hardened steel rings to provide a seal between the stationary and moveable valve plates. Valves that use 148mm ends have a maximum pressure rating of 85 bar (1233psi). Consult factory for 6” valve specifications.
V50HSTD
PART # V50HSTD
HYDRAULIC SLIDING SHUT-OFF VALVE The Hydraulic Sliding Shut-Off valve features a push- pull operation by one hydraulic cylinder. The valve body is rated at a nominal concrete working pressure of 1233psi/85bar. The sliding shut-off/diversion plate has a single hardened steel ring to provide a seal between the stationary and moveable valve plate. Valves that use 148mm ends have a maximum pressure rating of 85bar (1233psi).
V50HXHSD
PART # V50HXHSD PART # V40HXHSD
HYDRAULIC POWER PACKS (New Version) For use with diversion valves, Con Forms Hydraulic Power Packs provide an engineered solution tailored to each application.
NEW
1.5 to 5HP motor with 2.5 to 5 GPM flow Hydraulic fluid reservoir Relief valve Filter assembly with filter element Flanged base for bolted installation
VHYPP-M
PART # VHYPP-M (115/230 volt single phase 1.5gpm)
Also Available: PART # VHYPP (not shown) (115/230 volt single phase 2.5gpm) PART # VHYPP-XL (not shown) (240/480 volt 3-phase 5gpm)
Note: On the Con Forms Diversion Valve, the manual control lever is provided on the diversion valve itself, not on the hydraulic power pack.
CONFORMS.COM | 51
Powered by FlippingBook