HYDRAULIC DOUBLE DIVERSION VALVE
HYDRAULIC DOUBLE DIVERSION VALVE
The versatile 5"/DN125 CF Hydraulic Double Diversion Valve works as a push-pull operation. The push-pull is done by two 4” bore, 12” stroke hydraulic cylinders. A manually operated hydraulic directional control valve is mounted on the unit. Two replaceable, hardened steel rings provide a seal between the 1-1/2” thick valve plates. Pressure of the hydraulic control system cannot exceed 2500 psi (172 bar). The diversion valve body is rated at a nominal concrete working pressure of 3190 psi (220 bar) when new. The valve can be operated as a double diversion valve with one inlet, two outlets, and a clean-out port for each outlet. Or the valve can be configured with one inlet, a priming port, and two clean-out ports. A stop plug may be installed into the shorter pipe on the double flange assembly to deadhead the line in one position.
Part# V50HYDDD
DOUBLE DIVERSION VALVE SPARE PARTS FOR V50HYDDD
DESCRIPTION
QTY PART #
199-15769H 199-27438H 050P16780
199-19900
S-TUBE
1 199-15769H
5” FLANGE ASSEMBLY
1 199-27438H
O-RING
3 050P16780
STEEL SEALING RING
4 199-19900
GASKET V-GROOVED
2 CG50G
CG50G 199-08418 199-07354H 530-01103
CALIPER WEAR PAD
2 199-08418
SWIVEL ADAPTER
1 199-07354H
SWIVEL COUPLING
1 530-01103
SWIVEL GASKET
1 529P01104
SWIVEL RING
1 529-03279
529P01104 529-03279 199P20677
GASKET COPPER
2 199P20677
CONFORMS.COM | 55
Powered by FlippingBook