VALVES: HYDRAULIC DIVERSION VALVE
HYDRAULIC DIVERSION VALVE
The versatile 5"/DN125 CF Hydraulic Diversion Valve can be set-up to operate in two different modes. As a switcher valve, it can be used in set- ups where one concrete pump is feeding two placement lines. Using this technique, a smooth and quick conversion can be made from one line to the other, which increases the concrete placing capacity and flexibility of the entire system. As a Shut-Off Valve, the hydraulically powered switcher valve is installed in the horizontal placing line at the base of the vertical rise to shut off the line. The line from the pump is connected to one of two inlet ports. The other inlet is then fitted with a cap or piped to a designated area for concrete disposal. The outlet port is connected to the placing line system. The concrete filled line can then be hydraulically switched to the side with the cap, thereby holding the vertical head of concrete while the pump is stopped. Valves that use 5 ″ HD ends have a maximum pressure rating of 3,000 psi.
FRONT VIEW
Part #V50HYD
BACK VIEW
DIVERSION VALVE SPARE PARTS FOR V50HYD
DESCRIPTION
QTY PART #
S-TUBE 1 199-17777H FLANGE ASSEMBLY 1 199-27438H O-RING 1 050P16780 STEEL SEALING RING 4 199-19900 GASKET V-GROOVED 2 CG50G CALIPER WEAR PAD 2 199-08418 SWIVEL ADAPTER 1 199-07354H SWIVEL COUPLING 1 530-01103 SWIVEL GASKET 1 529P01104 SWIVEL RING 1 529-03279 GASKET COPPER 2 199P20677
199-17777H 199-27438H 050P16780
199-19900
CG50G 199-08418 199-07354H 530-01103
529P01104 529-03279 199P20677
CONFORMS.COM | 56
Powered by FlippingBook